Speedo cable guide

Well, we had some paint issues and never got a chance to repaint the front fender and then I wasn't able to run a tranny speedo so I ran a front wheel speedo. At any rate it's about time to repaint the fender so better cable guide will be needed. You can see that it rubbed the fender a bit.


I found this guide at the bike salvage yard, I think it's a Yamaha part.


Mark it.

Drill it.

Install.

Dissconnect the speedo cable.

Unscrew this end.

Install the fender.

Reconnect the speedo cable.

Cable looks good, but the brake line is tweaked from being tied to the cable so long.

Barely loosen the brake line on both ends.

Perfect.